Thursday, June 30, 2011

Routing Information Protocol (RIP) Configuration.

RouterA#show ip route
Gateway of last resort is not set
C         1.0.0.0/8 is directly connected, serial0/1
C         3.0.0.0/8 is directly connected, serial0/0
C         192.168.1.0/24 is directly connected, loopback0

 Configure RIP on Router A
RouterA#configure terminal
RouterA#(config)#router rip
RouterA#(config-router)#network 3.0.0.0
RouterA#(config-router)#network 1.0.0.0
RouterA#(config-router)#network 192.168.1.0
RouterA#(config-router)#exit
RouterA#(config)#

Now verify these configuration on router A with command us under:
RouterA#show ip route
To check the routing protocol with this command.
RouterA#show ip protocols

RouterB#show ip route
Gateway of last resort is not set
C         1.0.0.0/8 is directly connected, serial0/1
C         2.0.0.0/8 is directly connected, serial0/0
C         192.168.1.0/24 is directly connected, loopback0

Configure RIP on Router B

RouterB#configure terminal
RouterB#(config)#router rip
RouterB#(config-router)#network 1.0.0.0
RouterB#(config-router)#network 2.0.0.0
RouterB#(config-router)#network 192.168.2.0
RouterB#(config-router)#exit
RouterB#(config)#

Now verify these configuration on router B with command us under:
RouterB#show ip route 
RouterC#show ip route
Gateway of last resort is not set
C         2.0.0.0/8 is directly connected, serial1
C         3.0.0.0/8 is directly connected, serial0
C         192.168.3.0/24 is directly connected, loopback0

Configure RIP on Router C
RouterC#configure terminal
RouterC#(config)#router rip
RouterC#(config-router)#network 2.0.0.0
RouterC#(config-router)#network 3.0.0.0
RouterC#(config-router)#network 192.168.3.0
RouterC#(config-router)#exit
RouterC#(config)#

Now verify these configuration on router C with command us under:
RouterC#show ip route

No comments:

Post a Comment

Dear Reader, if you like My Blog content, feel free to comment on our blog posts.